MOQ: | 1000m / Grit |
Standard Packaging: | Paper packing per roll and export pallet |
Delivery Period: | 45 Workdays |
Payment Method: | T/T |
Supply Capacity: | 20000m / Day |
WEEM 1126S SiC Y-Cloth Abrasive / Silicon Carbide Polyester Cloth Raw Material Jumbo Roll
Quick Detail:
Backed by over three decadesWEEM 1126S is an upgraded version of the WEEM 1126, engineered for woodworking, stone, glass, and other general-purpose sanding applications. It features a tear-resistant, stiffer, and thicker Y-weight waterproof polyester backing, bonded with sharp silicon carbide grains. Compared to the original 1126, 1126S offers enhanced durability with up to 15% improved wear resistance, making it a cost-effective yet high-performance solution for wide belt sanding needs.
Backing: | Y-Weight Waterproof Polyester Cloth |
Treatment: | Antistatic |
Coating: | Close Coated |
Bonding: | Resin Over Resin |
Grain: | Calcined Alumina |
Segmented Belt Width: | 1400mm / 55" |
P24 |
P36 |
P40 |
P50 |
P60 |
P80 |
P100 |
P120 |
P150 |
P180 |
P220 |
P240 |
P280 |
P320 |
P400 |
○ |
○ |
○ |
○ |
● |
● |
● |
● |
○ |
○ |
○ |
○ |
○ |
○ |
○ |
● : Regular ○ : Custom
Applications:
Woodworking / Wood-based Panel / MDF / HDF / OSB / Plywood / Laminate Sheet / Chipboard / Particle Board / Glass / Common Metal
Competitive Advantage:
Backed by over three decades of experience in panel sanding, we developed WEEM 1126S SIC Y-CLOTH ABRASIVE to meet the demands of modern manufacturing — providing a precise balance between performance and affordability.
It is constructed with:
This product is optimized for sanding MDF, HDF, OSB, chipboard, plywood, and similar engineered wood panels, while also suitable for materials like glass, rubber, and plastics.
Silicon carbide (SiC) is a very hard abrasive with a sharp, brittle crystalline structure. It produces a fine, linear scratch pattern and excels in precision sanding under light pressure. SiC is ideal for non-ferrous metals (brass, copper, bronze), as well as woodworking and finishing applications involving polyurethanes, lacquers, primers, and sealers.
Closed-coat design increases abrasive grain coverage, allowing more cutting points per square inch. This results in:
MOQ: | 1000m / Grit |
Standard Packaging: | Paper packing per roll and export pallet |
Delivery Period: | 45 Workdays |
Payment Method: | T/T |
Supply Capacity: | 20000m / Day |
WEEM 1126S SiC Y-Cloth Abrasive / Silicon Carbide Polyester Cloth Raw Material Jumbo Roll
Quick Detail:
Backed by over three decadesWEEM 1126S is an upgraded version of the WEEM 1126, engineered for woodworking, stone, glass, and other general-purpose sanding applications. It features a tear-resistant, stiffer, and thicker Y-weight waterproof polyester backing, bonded with sharp silicon carbide grains. Compared to the original 1126, 1126S offers enhanced durability with up to 15% improved wear resistance, making it a cost-effective yet high-performance solution for wide belt sanding needs.
Backing: | Y-Weight Waterproof Polyester Cloth |
Treatment: | Antistatic |
Coating: | Close Coated |
Bonding: | Resin Over Resin |
Grain: | Calcined Alumina |
Segmented Belt Width: | 1400mm / 55" |
P24 |
P36 |
P40 |
P50 |
P60 |
P80 |
P100 |
P120 |
P150 |
P180 |
P220 |
P240 |
P280 |
P320 |
P400 |
○ |
○ |
○ |
○ |
● |
● |
● |
● |
○ |
○ |
○ |
○ |
○ |
○ |
○ |
● : Regular ○ : Custom
Applications:
Woodworking / Wood-based Panel / MDF / HDF / OSB / Plywood / Laminate Sheet / Chipboard / Particle Board / Glass / Common Metal
Competitive Advantage:
Backed by over three decades of experience in panel sanding, we developed WEEM 1126S SIC Y-CLOTH ABRASIVE to meet the demands of modern manufacturing — providing a precise balance between performance and affordability.
It is constructed with:
This product is optimized for sanding MDF, HDF, OSB, chipboard, plywood, and similar engineered wood panels, while also suitable for materials like glass, rubber, and plastics.
Silicon carbide (SiC) is a very hard abrasive with a sharp, brittle crystalline structure. It produces a fine, linear scratch pattern and excels in precision sanding under light pressure. SiC is ideal for non-ferrous metals (brass, copper, bronze), as well as woodworking and finishing applications involving polyurethanes, lacquers, primers, and sealers.
Closed-coat design increases abrasive grain coverage, allowing more cutting points per square inch. This results in: