Place of Origin: | China |
Brand Name: | WEEM |
Model Number: | 3126-31 |
Minimum Order Quantity: | 1000 |
---|---|
Packaging Details: | 50/box; 500/box |
Gains: | Zirconia | Backing: | Y Weight Polyester |
---|---|---|---|
Type: | Floor Sanding Disc | ||
High Light: | floor sanding discs,floor sanding belts,Zirconia Cloth Floor Sanding Abrasives |
Zirconia Cloth Floor Sanding Abrasives - 7inch / 178mm Disc Grit P36 - P100
Quick Detail:
WEEM 3126-31 Floor Sanding Discs, 7" x 7/8 "size, are used on a hand-held edger machines to sand areas on a floor where the drum/belt sander does not reach. It structured premium zirconia grain bonded to extra Y-weight polyester backing. Fits machine like: Clarke, Hold, Porter Cable, Skil and Tennant.
Description:
WEEM 3126 material is use Zirconia gains mix with Silicon Carbdie grains. Why we use this mixture? Becasue it is special desgin for wood working use, combining the 2 type of abrasives' advantage. Zirconia, ZA, is recognized by its blue color. A rugged synthetic abrasive that is best suited to stock removal applications. The heavy duty structure requires heavier pressure to break down the self-sharpening grains, which work diferently to other abrasive. While working, Zirconia abrasive will continue to break out new sharpness as others while working will run out its sharpness. This abrasive can last up to 5 times longer than aluminum oxide on tough applications. Silicon Carbide, Sic is known by its crystalize structure, and its hardness. As abrasive grain, Sic is sharp and fast cut on wood application.
By mixing with this two abraisve gains, we make WEEM 3126 Zirconia is sharper and last longer than tradditional product, and still at a reasonable price.
WEEM 3126-31 Floor sanding discs are of size 7" x 7/8 " (178mm Diameter by a 22mm hole). It built with premium zirconia gain coated on strong, firm and extra heavy y weight waterproof polyester backing, resin on resin bond. When the discs are grinding, it always can keep in a good state. So it has a high cost performance. It is fit for portable edge sander for working on the perimeter of the room. These can sand right up to the skirtings.
A closed coat product has a higher number of abrasive cutting points per square inch and results in higher stock removal rate and longer time before the abrasive wears out. Normally results in a better finish.
Applications:
Floor sanding, floor edge sander.
Specifications:
Part Number: | 3126-31 |
Backing: | Y weight waterproof polyester |
Treatments: | Anti-static |
Coated: | Close coated |
Bond: | Resin over resin |
Grain: | Zirconia Mix Silicon Carbide |
Grit: | P36/P40/P60/P80/P100 |
Diameter: | 7" (178mm) |
Bore: | 7/8" (22mm) |
Contact Person: Jack Wang
Tel: 008613814838149